The light bulbs from neutral and low fuel had burnt the plastic cowling and when the neutral light was on it bleed into the low fuel warning light display. So I bought a new part 40740011A speedometer support from Mick. Below are the pictures and the steps needed to replace the speedo plastic cowling.
The most important information for me was finding that I needed a small screwdriver to undo the reset switch on the speedo. This was needed to remove the speedo from the cowling so it could be replaced.
The parts needed
A small positive screwdriver to undo the speedo reset
Clocks apart with the 4 8mm nuts taken off
Fairing zeus clips removed off top part of fairing
Picture of the clocks
Close up of the part to be removed.
Greenwich Mean Time